Yamaha YZ250F(T) Owner's Service Manual page 362

3
a b
1
2
c
4 - 54
CLUTCH
3. Bend the lock washer 1 tab.
4. Install:
• Seat plate 1
• Cushion spring 2
NOTE:
• Install the seat plate with its chamfered por-
tion a facing the clutch boss 3.
• Install the seat plate so that it is not caught
on the step b.
• Install the cushion spring with the paint c
facing out.
5. Install:
• Friction plate 1 1
• Clutch plate 1 2
• Friction plate 2 3
• Clutch plate 2 4
NOTE:
• Install the clutch plates and friction plates
alternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
• Use the friction plates 1 for the first and final
while paying attention to the difference in
surface pattern.
• Apply the engine oil on the friction plates and
clutch plates.
• Unlike the clutch plate 2, the clutch plate 1
has no surface gloss. Use the clutch plate 1
for the first while paying attention to the dif-
ference in surface gloss.
6. Install:
• Bearing 1
• Washer 2
• Circlip 3
To push rod 1 4.
NOTE:
Apply the engine oil on the bearing and
washer.
ENG