Yamaha YZ250F(T) Owner's Service Manual page 186

Temp.
-20 -10 0 10 20
10W-30
10W-40
15W-40
20W-40
20W-50
-4 14 30 50 68
ENGINE OIL LEVEL INSPECTION
˚C
30 40 50
86 104 122
˚F
a
b
3 - 14
(For USA and CDN)
Recommended oil:
At 5 °C (40 °F) or higher È
Yamalube 4 (20W-40) or SAE
20W-40 type SG motor oil (Non-
Friction modified)
At 15 °C (60 °F) or lower É
Yamalube 4 (10W-30) or SAE
10W-30 type SG motor oil (Non-
Friction modified)
and/or
Yamalube 4-R (15W-50)
(Non-Friction modified)
CAUTION:
• Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
• Do not allow foreign material to enter the
crankcase.
(Except for USA and CDN)
Recommended oil:
Refer to the following chart for
selection of oils which are
suited to the atmospheric
temperatures.
Recommended engine oil classi-
fication:
API STANDARD:
API "SG" or higher grade
(Designed primarily for
motorcycles)
CAUTION:
• Do not add any chemical additives or use
oils with a grade of CD a or higher.
• Do not use oils labeled "ENERGY CON-
SERVING II" b or higher. Engine oil also
lubricates the clutch and additives could
cause clutch slippage.
• Do not allow foreign materials to enter the
crankcase.
5. Install:
• Oil tank cap
6. Start the engine and let it warm up for sev-
eral minutes.
7. Turn off the engine and inspect the oil level
once again.
NOTE:
Wait a few minutes until the oil settles before
inspecting the oil level.
INSP
ADJ