IOPn.LinkDriver Show Port Information
This command returns port information for the IOP Link (IL) on the specified IOP.
Command
IOPn.LinkDriverShow Port Information
Console Syntax MTCCONS IOPn.LinkDriver Show Port Information
n – the ID number of the IOP (1 or 2)
Variables
Results
Table 5-26 IOP LinkDriver Show Port Information
Value
Vendor Description
Network Binding Name
Current Address
Permanent Address
Destination Address
Destination Iop ID
Source Circuit ID
Destination Circuit ID
Transport Path State
Commands
Meaning
The manufacturer data reported directly from the card.
Typically, this is the vendor name and model number.
The device service name of the Ethernet adapter to which the
IL is bound
The current Ethernet address used by the IL network adapter
The permanent Ethernet address of the IL network adapter
The Ethernet address of the remote IOP
Endurance element identifier of the remote IOP
Circuit ID of the local IOP
Circuit ID of the remote IOP
Path state value (DISABLED, CLOSED, OPEN, or ACTIVE)
5-63