HP NetServer AA 6200 Administrator's Manual page 203

Parameter
interval
flag
When issuing console commands, note the following:
• An example of a command line is
• The MTCCONS syntax is not case sensitive.
• You can use abbreviated syntax by entering the minimum characters that make the
command unique. For example, for the IOP Disable Command, you can type either:
MTCCONS IOPn Enable Operation From IOPx
MTCCONS IOPn E O From IOPx
• To access MTCCONS command help, type a question mark (?). General command help
and specific command help is available. For example, to list all commands, type:
MTCCONS ?
• To run MTCCONS on a remote workstation, you need to install Endurance Manager on
the remote workstation. Refer to
Guide for information. Once the program is installed, you execute a command by typing:
MTCCONS \\computername command
where computer name is the name of the node you want to access (e.g., Server1) and
command is the command you want to execute. The backslashes (\\) must be entered where
shown.
Table 7-5 summarizes the MTCCONS commands.
Note: The
-disable_safeguard
that disable or shut down server elements, depending on your configuration. Refer
to the command descriptions to determine whether this argument is required.
Tools and Utilities
Table 7-4 MTCCONS Parameters (Continued)
Description
Integer from 0 to n
True = on; False = off
MTCCONS IOP1.MTCMON SHOW CONFIGURATION
Chapter 3
argument may be required for particular commands
of the HP Netserver AA Solution Installation
.
7-17