Mtccons (Endurance Manager Console Commands); Mtccons Parameters - HP NetServer AA 6200 Administrator's Manual

MTCCONS (Endurance Manager Console Commands)

You can execute Endurance server commands from an MS-DOS window. The primary reason
for using MTCCONS (Endurance Manager console commands) is to execute scripts for system
validation (test) or system management.
When using MTCCONS, enter the command syntax and any required parameters.
Note: We recommend that you set your current directory to the Endurance area in
Program Files before using MTCCONS commands.
Each command has the following components: Prefix, Target, Verb, Operation type, Executed
from and any associated Parameters. For example:
MTCCONS CE1
Prefix Target*
* Target and Verb are not order dependent. The command line syntax allows you to enter target,
then verb, or vice versa.
To use MTCCONS commands, you must enter MTCCONS as the Prefix for every Endurance
console command. Depending on the command, the other fields vary from command to
command. Refer to the command descriptions in
MTCCONS parameters are described in
Parameter
-a
-all
-desc
-height
-o
-disable_safeguard
-v
-width
7-16
Remove From Configuration
Verb* Operation Type
Table
Table 7-4 MTCCONS Parameters
Description
Appends data to a file
Shows all data fields
Prints a description of the command
Screen buffer height
Writes data to a file
Allows you to remove the only active CE or IOP from a configuration
Verbose displays output labels, values, and units
Screen buffer width
From IOP2
Executed from
Chapter 5 for more information. The
7-4.
HP Netserver AA Solution Administrator's Guide
-disable_safeguard
Parameter