You can use the icons and buttons in this window to add, remove (delete), and display devices
in your configuration. The icons in this window are described in
described in
Table
6-2. For more detailed information about Endurance Configuration Utility
windows and dialog boxes, refer to the utility's online help.
Warning: The configuration information must be identical on both IOPs.
Table 6-1 Endurance Configuration Utility Devices and Icons
Device
CD ROM Drives
Disk Drives
Mirrored
Non-mirrored
Network
Adapters
Tape Drives
Configuration Utility
If you add or remove any hardware devices from your
configuration, you must make the same change on each IOP.
Description
CD-ROMs are non-mirrored and can be either SCSI CD-ROM
drives or IDE CD-ROM drives.
Disk drives are either mirrored or non-mirrored SCSI disk
drives. Mirrored disks are paired, one in each IOP.
You must identify the CE boot disk on the Properties page for
the designated CE disk drive.
Network adapters must be Ethernet adapters that are
configured in pairs, one in each IOP.
All tape drives are non-mirrored SCSI tape drives.
Table
6-1; the buttons are
6-3