Using the Endurance Configuration Utility
Using this window, you can:
•
Add Devices
•
Display Device Properties
•
Remove Devices
•
Commit Configuration Changes
Warning: The configuration information must be identical on both IOPs,
Add Devices
To add a hardware device:
Step
Action
1
Click on the icon for the device you
want to add.
2
Click Add.
3
Follow the on-screen instructions.
4
Complete your configuration changes
following the steps in
Configuration Changes
6-13.
6-6
except for Ethernet addresses. If you add or remove any devices
from your configuration, you must make the change on each
IOP.
Commit
section on
Notes
For example, it might be CD-ROM drives.
If you need additional information, use the
online help.
page
HP Netserver AA Solution Administrator's Guide