HP NetServer AA 6200 Administrator's Manual page 237

Step Action
6 Reboot the new IOP into Operational
Endurance I/O Processor Mode.
7 Use Endurance Manager to ensure
that:
• Any components affected by this
procedure are active or online.
Reenable any faulted or disabled
components
• The IOP joins the server.
• The IL transitions to active.
• The IOPx.Ethernet transitions to
standby, and all other cables
transition to online.
• A mirror copy is either started or
pending for all mirrored devices.
• After all mirror copies are complete,
check the message log for any
messages that occurred after the
IOP was replaced and that begin
with
Endurance Server Maintenance
(page 9-31).
or .
Notes
The public Ethernets may require additional
considerations. Refer to the procedures on
9-24 for information.
page
9-21