Shutting Down a CE
To shut down a CE:
Step
Action
1
Make sure that the other CE is active.
2
From Endurance Manager issue the
CEx Disable Operation command.
3
Power off the CE if desired.
Shutting Down the CE Operating System
Before you shut down the CE operating system, consider the fact that this procedure removes
your Endurance server from service. Make sure that you schedule an appropriate time and that
you have completed any necessary backups before starting this procedure.
To shut down the CE operating system, you can go to the system and shut it down using these
steps:
Step
Action
1
Make sure that the keyboard and
mouse are available at the CE.
2
Shut down Windows.
Using the Endurance Manager, you can also shut down the CE operating system remotely. In
that case, locally on a CE or IOP, or on a remote system, issue the CE OS Shutdown command
to shut down the CE operating system.
9-8
Notes
If the other CE is not active, shutting down the
only active CE removes the Endurance server
from service.
A disabled element will not attempt to rejoin the
server.
Notes
If necessary, enter the hotkey sequence to
switch control to the CE operating system.
Be sure not to have Windows restart after you
shut it down.
HP Netserver AA Solution Administrator's Guide