IOPn.DatagramService Show Port Information
This command returns port information about devices that are bound to the Endurance
Datagram Service (DGS) on the specified IOP.
Command
IOPn.DatagramService Show Port Information
Console Syntax MTCCONS IOPn.DatagramService Show Port Information
n – the ID number of the IOP (1 or 2)
Variables
Results
Value
Vendor Description
Network Binding Name
Current Source Address
Permanent Address
See Also
IOPn.Ethernetx Show Port Information
Commands
Table 5-10 DatagramService Port Information
Meaning
The manufacturer data reported directly from the card.
Typically, this is the vendor name and model number.
CurrentControlSet\Services\MtcDgs\Linkage Bind value
The current MAC address in use by the card
The permanent MAC address burned on the card
5-27