Change CE Ethernet Adapters Properties
If you need to change information for a CE Ethernet adapter (because you initially entered
incorrect information or because you replaced an adapter):
Note:
This procedure is not required except for a new MAC address, in which case, you
must remove the adapter and add it back in.
Step
Action
1
Select and Remove (delete) the Ethernet
adapter that is currently defined.
2
Click Commit.
3
Add a new Ethernet adapter with the
appropriate settings following the
instructions in
4
Complete your configuration changes
following the steps in the
Configuration Changes
6-13.
Configuration Utility
Add Devices
on
page
6-6.
Commit
section on
page
Notes
The information for the Ethernet adapters
includes the:
• NIC address — the permanent
Ethernet address
• Connection Name — the name that
corresponds to the name you specified
on the Network and dial-up Connection
screen
• Vendor Description — the vendor
description and model number of the
hardware
6-11