Iopn.inputprovider Disable Led Flashing; Iopn.inputprovider Enable Automatic Switchover - HP NetServer AA 6200 Administrator's Manual

IOPn.InputProvider Disable LED Flashing

This command disables the Scroll Lock LED from flashing the input device status. By default,
LED flashing is enabled, and the Scroll Lock LED flashes whenever the input devices are
logically connected to the local IOP.
Command IOPn.InputProvider Disable LED Flashing
Console Syntax MTCCONS IOPn.InputProvider Disable LED Flashing
n – the ID number of the IOP (1 or 2)
Variables
See Also
IOPn.InputProvider Enable LED Flashing
IOPn.InputProvider Show LED Flashing

IOPn.InputProvider Enable Automatic Switchover

This command enables input devices to automatically switch over to the CEs whenever a CE
reboots. You can disable input devices from switching over by issuing an
Disable Automatic Switchover
By default, automatic switchover for input devices is enabled.
Command IOPn.InputProvider Enable Automatic Switchover
Console Syntax MTCCONS IOPn.InputProvider Enable Automatic Switchover
n – the ID number of the IOP (1 or 2)
Variables
See Also
IOPn.InputProvider Disable Automatic Switchover
IOPn.InputProvider Set Input Devices CE
IOPn.InputProvider Set Input Devices IOP
IOPn.InputProvider Show Automatic Switchover
Commands
command.
IOPn.InputProvider
5-49