CE Enable Auto Boot
This command enables Auto Boot for a specific CE. Auto Boot allows the CE to automatically
boot the CE's Windows operating system after a reboot or power cycle. By default, Auto Boot
is true (enabled).
Command
CEn Enable Auto Boot From IOPx
Console Syntax MTCCONS CEn Enable Auto Boot From IOPx
n – the ID number of the CE (1 or 2)
Variables
x – the ID number of the IOP (1 or 2)
To verify that Auto Boot has been enabled for CEn, issue a CEn Show Auto
Results
Boot or CEn Show Parameters command from either IOP.
See Also
CE Disable Auto Boot
CE Show Auto Boot
CE Show Parameters
CE Enable Auto Synch
This command enables Auto Synch for a specific CE. Auto Synch allows the second CE to
automatically attempt to synchronize with the running CE. By default, Auto Synch is true
(enabled).
Command
CEn Enable Auto Synch From IOPx
Console Syntax MTCCONS CEn Enable Auto Synch From IOPx
n – the ID number of the CE (1 or 2)
Variables
x – the ID number of the IOP (1 or 2)
To verify that Auto Synch has been enabled for CEn, issue a CEn Show Auto
Synch or CEn Show Parameters command from either IOP.
See Also
CE Disable Auto Synch
CE Show Auto Synch
CE Show Parameters
Commands
5-13