Verifying The Configurations - HP 6125XLG Configuration Manual

[SwitchA] fcoe-mode fcf
[SwitchA] vsan 1
# Create a zone alias Alias1, and add pWWN 22:33:44:55:66:77:88:99 (Disk B) and FC address
020004 (Disk C) as its members.
[SwitchA-vsan1] zone-alias name Alias1
[SwitchA-vsan1-zone-alias-Alias1] member pwwn 22:33:44:55:66:77:88:99
[SwitchA-vsan1-zone-alias-Alias1] member fcid 020004
[SwitchA-vsan1-zone-alias-Alias1] quit
# Create a zone Zone1 and specify FC ID 010001 as its member. Create a zone Zone2 and specify FC
ID 010002 and pWWN 1 1:22:33:44:55:66:77:88, whose zone aliases are Alias1, as its members.
Create Zone 3 and specify FC ID 010003, whose zone alias is Alias1, as its member.
[SwitchA-vsan1] zone name Zone1
[SwitchA-vsan1-zone-Zone1] member fcid 010001
[SwitchA-vsan1-zone-Zone1] quit
[SwitchA-vsan1] zone name Zone2
[SwitchA-vsan1-zone-Zone2] member fcid 010002
[SwitchA-vsan1-zone-Zone2] member pwwn 11:22:33:44:55:66:77:88
[SwitchA-vsan1-zone-Zone2] member zone-alias Alias1
[SwitchA-vsan1-zone-Zone2] quit
[SwitchA-vsan1] zone name Zone3
[SwitchA-vsan1-zone-Zone3] member fcid 010003
[SwitchA-vsan1-zone-Zone3] member zone-alias Alias1
[SwitchA-vsan1-zone-Zone3] quit
# Create a zone set Zoneset1 and add the zones Zone1, Zone2, and Zone3 as its members.
[SwitchA-vsan1] zoneset name Zoneset1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone2
[SwitchA-vsan1-zoneset-Zoneset1] member Zone3
[SwitchA-vsan1-zoneset-Zoneset1] quit
# Configure zone distribution and merge types as complete distribution and complete merge.
[SwitchA-vsan1] zoneset distribute full
# Activate a zone set as the active zone set, and distribute it to the entire fabric.
[SwitchA-vsan1] zoneset activate name Zoneset1

Verifying the configurations

All verification tasks are performed on Switch B.
# Display zone set information for VSAN 1.
<SwitchB> display zoneset vsan 1
VSAN 1:
zoneset name Zoneset1
zone name Zone1
fcid 0x010001
zone name Zone2
fcid 0x010002
pwwn 11:22:33:44:55:66:77:88
84