Download Print this page

HP 6125XLG Configuration Manual: Configuring Zone Sets; Configuring The Default Zone Policy; Configuring Zone Distribution And Merge Types

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

Step
3.
Create a zone and enter
its view.
4.
Add a member to the
zone.

Configuring zone sets

You can configure a maximum of 128 zone sets for all VSANs on a switch.
To configure a zone set:
Step
Enter system view.
1.
2.
Enter VSAN view.
3.
Create a zone set and
enter its view.
4.
Add a zone to the zone
set.

Configuring the default zone policy

Step
1.
Enter system view.
2.
Enter VSAN view.
3.
Permit traffic between
default zone members.
4.
Deny traffic between
default zone members.

Configuring zone distribution and merge types

Complete distribution (or merge) distributes (or merges) both the active zone set and zone database.
Incomplete distribution (or merge) distributes (or merges) only the active zone set.
The configured distribution type applies to distribution operations triggered by the zoneset activate
command instead of the zoneset distribute command.
The configured merge type applies to all merge operations.
To configure zone distribution and merge types:
Step
1.
Enter system view.
Command
zone name zone-name
member { fcid fcid | pwwn pwwn |
zone-alias zone-alias-name }
Command
system-view
vsan vsan-id
zoneset name zoneset-name
member zone-name
Command
system-view
vsan vsan-id
zone default-zone permit
undo zone default-zone permit
Command
system-view
79
Remarks
If the zone has been created, enter
its view directly.
By default, no member exists in a
zone.
Remarks
N/A
N/A
If the zone set has been created,
enter its view directly.
By default, no zone exists in a zone
set.
Remarks
N/A
N/A
Use one of the commands.
By default, default zone members
are not permitted to access each
other.
Remarks
N/A

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: