HP 6125XLG Configuration Manual page 48

# Enable interface Ten-GigabitEthernet 1/1/7 to automatically negotiate with its peer to decide
whether to enable PFC, enable PFC for 802.1p priority 3, and configure Ten-GigabitEthernet
1/1/7 to trust the 802.1p priority carried in packets.
[SwitchC-Ten-GigabitEthernet1/1/7] priority-flow-control auto
[SwitchC-Ten-GigabitEthernet1/1/7] priority-flow-control no-drop dot1p 3
[SwitchC-Ten-GigabitEthernet1/1/7] qos trust dot1p
[SwitchC-Ten-GigabitEthernet1/1/7] quit
# Create interface VFC 1, and configure it to operate in E mode.
[SwitchC] interface vfc 1
[SwitchC-Vfc1] fc mode e
# Bind interface VFC 1 to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 1 as a trunk
port.
[SwitchC-Vfc1] bind interface ten-gigabitethernet 1/1/5
[SwitchC-Vfc1] port trunk vsan 1
[SwitchC-Vfc1] quit
# Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 10 as a trunk port.
[SwitchC] interface ten-gigabitethernet 1/1/5
[SwitchC-Ten-GigabitEthernet1/1/5] port link-type trunk
[SwitchC-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10
[SwitchC-Ten-GigabitEthernet1/1/5] quit
# Create interface VFC 2, and configure it to operate in E mode.
[SwitchC] interface vfc 2
[SwitchC-Vfc2] fc mode e
# Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a trunk
port.
[SwitchC-Vfc2] bind interface ten-gigabitethernet 1/1/6
[SwitchC-Vfc2] port trunk vsan 1
[SwitchC-Vfc2] quit
# Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port.
[SwitchC] interface ten-gigabitethernet 1/1/6
[SwitchC-Ten-GigabitEthernet1/1/6] port link-type trunk
[SwitchC-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10
[SwitchC-Ten-GigabitEthernet1/1/6] quit
# Create interface VFC 3, and configure it to operate in F mode.
[SwitchC] interface vfc 3
[SwitchC-Vfc3] fc mode f
# Bind interface VFC 3 to interface Ten-GigabitEthernet 1/1/7, and assign it to VSAN 1 as a trunk
port.
[SwitchC-Vfc3] bind interface ten-gigabitethernet 1/1/7
[SwitchC-Vfc3] port trunk vsan 1
[SwitchC-Vfc3] quit
# Assign interface Ten-GigabitEthernet 1/1/7 to VLAN 10 as a trunk port.
[SwitchC] interface ten-gigabitethernet 1/1/7
[SwitchC-Ten-GigabitEthernet1/1/7] port link-type trunk
[SwitchC-Ten-GigabitEthernet1/1/7] port trunk permit vlan 10
[SwitchC-Ten-GigabitEthernet1/1/7] quit
42