HP 6125XLG Configuration Manual page 98

[SwitchA-Ten-GigabitEthernet1/1/6] qos trust dot1p
[SwitchA-Ten-GigabitEthernet1/1/6] quit
# Create interface VFC 1, bind it to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 1 as a
trunk port.
[SwitchA] interface vfc 1
[SwitchA-Vfc1] bind interface ten-gigabitethernet 1/1/5
[SwitchA-Vfc1] port trunk vsan 1
[SwitchA-Vfc1] quit
# Configure Ten-GigabitEthernet 1/1/5 to allow VLAN 10.
[SwitchA] interface ten-gigabitethernet 1/1/5
[SwitchA-Ten-GigabitEthernet1/1/5] port link-type trunk
[SwitchA-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10
[SwitchA-Ten-GigabitEthernet1/1/5] quit
# Create interface VFC 2, bind it to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a
trunk port.
[SwitchA] interface vfc 2
[SwitchA-Vfc2] bind interface ten-gigabitethernet 1/1/6
[SwitchA-Vfc2] port trunk vsan 1
[SwitchA-Vfc2] quit
# Configure Ten-GigabitEthernet 1/1/6 to allow VLAN 10.
[SwitchA] interface ten-gigabitethernet 1/1/6
[SwitchA-Ten-GigabitEthernet1/1/6] port link-type trunk
[SwitchA-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10
[SwitchA-Ten-GigabitEthernet1/1/6] quit
# Create interface VFC 3, bind it to interface Ten-GigabitEthernet 1/1/7, and assign it to VSAN 1 as a
trunk port.
[SwitchA] interface vfc 3
[SwitchA-Vfc3] bind interface ten-gigabitethernet 1/1/7
[SwitchA-Vfc3] port trunk vsan 1
[SwitchA-Vfc3] quit
# Configure Ten-GigabitEthernet 1/1/7 to allow VLAN 10.
[SwitchA] interface ten-gigabitethernet 1/1/7
[SwitchA-Ten-GigabitEthernet1/1/7] port link-type trunk
[SwitchA-Ten-GigabitEthernet1/1/7] port trunk permit vlan 10
[SwitchA-Ten-GigabitEthernet1/1/7] quit
# Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 1.
[SwitchA] vlan 10
[SwitchA-vlan10] fcoe enable vsan 1
[SwitchA-vlan10] quit
# Configure the uplink interface.
[SwitchA] interface vfc 3
[SwitchA-Vfc3] fc mode np
[SwitchA-Vfc3] quit
# Configure the downlink interfaces.
[SwitchA] interface vfc 1
92