Download Print this page

HP 6125XLG Configuration Manual Page 26

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

# Create interface VFC 2, and configure it to operate in E mode.
[SwitchB] interface vfc 2
[SwitchB-Vfc2] fc mode e
# Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 10 as a
trunk port.
[SwitchB-Vfc2] bind interface ten-gigabitethernet 1/1/6
[SwitchB-Vfc2] port trunk vsan 10
[SwitchB-Vfc2] quit
# Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 20 as a trunk port.
[SwitchB] interface ten-gigabitethernet 1/1/6
[SwitchB-Ten-GigabitEthernet1/1/6] port link-type trunk
[SwitchB-Ten-GigabitEthernet1/1/6] port trunk permit vlan 20
[SwitchB-Ten-GigabitEthernet1/1/6] quit
# Enable FCoE for VLAN 20 and map VLAN 20 to VSAN 10.
[SwitchB] vlan 20
[SwitchB-vlan20] fcoe enable vsan 10
20

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: