Download Print this page

HP 6125XLG Configuration Manual: Deleting The Zone Database; Displaying And Maintaining Fc Zones; Fc Zone Configuration Example; Network Requirements

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

Deleting the zone database

You can delete the zone database for the specified VSAN, including all zone sets, zones, and zone
aliases, but not the active zone set.
To delete the zone database:
Step
1.
Enter system view.
2.
Enter VSAN view.
3.
Delete the zone database.

Displaying and maintaining FC zones

Execute display commands in any view.
Task
Display zone alias information.
Display zone information.
Display zone set information.
Display information about the active zone set.
Display information about a zone member (including
the zone and zone alias to which the zone member
belongs and the zone to which the zone alias
belongs).
Display the running status and configuration of an FC
zone.

FC zone configuration example

Network requirements

As shown in
Access control is specified for VSAN 1 as follows:
Server A does not access any disk but might need to subsequently.
Server B can access Disks A, B, and C.
Server C can access Disks B and C.
Servers cannot access each other.
Figure
23, all nodes have registered with the switches.
Command
system-view
vsan vsan-id
delete zone database all
Command
display zone-alias [ [ name zone-alias-name ] vsan
vsan-id ]
display zone [ [ name zone-name ] vsan vsan-id ]
display zoneset [ [ name zoneset-name ] vsan vsan-id ]
display zoneset active [ vsan vsan-id ]
display zone member { fcid fcid | pwwn pwwn |
zone-alias zone-alias-name } [ vsan vsan-id ]
display zone status [ vsan vsan-id ]
82

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: