Download Print this page

HP 6125XLG Configuration Manual Page 110

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

100.00% packet loss
The output shows that Switch A cannot reach Switch C.
5.
Use the fctracert command to identify the faulty node.
[SwitchA] fctracert fcid fffc03 vsan 1
Route present for: 0xfffc03, press CTRL_C to break
20:00:00:0b:46:00:02:82(0xfffc01)
20:00:00:05:30:00:18:db(0xfffc02)
Fctracert uncompleted: no route to destination port.
The output shows that Switch A can reach Switch B, but Switch B cannot reach Switch C. Therefore,
you can use the display fc routing-table command on Switch B to see whether there is a route to
Switch C.
104

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: