HP 6125XLG Configuration Manual page 76

Routing Table: VSAN 2
Destinations : 5
Destination/mask
0x020000/8
0xfffc01/24
0xfffffa/24
0xfffffc/24
0xfffffd/24
# On Switch A, use the fcping command to ping Switch B and check whether Switch B is reachable.
[SwitchA] fcping fcid fffc02 vsan 2
FCPING fcid 0xfffc02: 128 data bytes, press CTRL_C to break.
Reply from 0xfffc02: bytes = 128 time = 1.102 ms
Reply from 0xfffc02: bytes = 128 time = 0.276 ms
Reply from 0xfffc02: bytes = 128 time = 0.253 ms
Reply from 0xfffc02: bytes = 128 time = 0.270 ms
Reply from 0xfffc02: bytes = 128 time = 0.247 ms
--- 0xfffc02 fcping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0.247/0.430/1.102 ms
The output shows that Switch A can reach Switch B.
Routes : 5
Protocol Preference
FSPF 20
DIRECT 0
DIRECT 0
DIRECT 0
DIRECT 0
70
Cost Interface
265 Vfc1
0 InLoop0
0 InLoop0
0 InLoop0
0 InLoop0