Download Print this page

HP 6125XLG Configuration Manual Page 46

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

# Create interface VFC 2, and configure it to operate in E mode.
[SwitchB] interface vfc 2
[SwitchB-Vfc2] fc mode e
# Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a trunk
port.
[SwitchB-Vfc2] bind interface ten-gigabitethernet 1/1/6
[SwitchB-Vfc2] port trunk vsan 1
[SwitchB-Vfc2] quit
# Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port.
[SwitchB] interface ten-gigabitethernet 1/1/6
[SwitchB-Ten-GigabitEthernet1/1/6] port link-type trunk
[SwitchB-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10
[SwitchB-Ten-GigabitEthernet1/1/6] quit
# Create interface VFC 3, and configure it to operate in E mode.
[SwitchB] interface vfc 3
[SwitchB-Vfc3] fc mode e
# Bind interface VFC 3 to interface Ten-GigabitEthernet 1/1/7, and assign it to VSAN 1 as a trunk
port.
[SwitchB-Vfc3] bind interface ten-gigabitethernet 1/1/7
[SwitchB-Vfc3] port trunk vsan 1
[SwitchB-Vfc3] quit
# Assign interface Ten-GigabitEthernet 1/1/7 to VLAN 10 as a trunk port.
[SwitchB] interface ten-gigabitethernet 1/1/7
[SwitchB-Ten-GigabitEthernet1/1/7] port link-type trunk
[SwitchB-Ten-GigabitEthernet1/1/7] port trunk permit vlan 10
[SwitchB-Ten-GigabitEthernet1/1/7] quit
# Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 1.
[SwitchB] vlan 10
[SwitchB-vlan10] fcoe enable vsan 1
[SwitchB-vlan10] quit
3.
Configure Switch C:
# Configure Switch C to operate in advanced mode, save the configuration, and reboot Switch C.
(Skip this step if the switch is operating in advanced mode.)
<SwitchC> system-view
[SwitchC] system-working-mode advance
Do you want to change the system working mode? [Y/N]:y
The system working mode is changed, please save the configuration and reboot the
system to make it effective.
# Configure Switch C to operate in FCF mode, and enable the fabric configuration function in
VSAN 1 (optional, because this function is enabled by default).
<SwitchC> system-view
[SwitchB] fcoe-mode fcf
[SwitchC] vsan 1
[SwitchC-vsan1] domain configure enable
# Configure the domain ID as 13.
[SwitchC-vsan1] domain-id 13 preferred
40

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: