Display Ipsec Profile - HP 5920 Command Reference Manual

IPsec SA local duration(traffic based): 1843200 kilobytes
Table 38 Command output
Field
IPsec Policy Template
Sequence number
Description
Security data flow
IKE profile
Remote address
Transform set
IPsec SA local duration(time based)
IPsec SA local duration(traffic based)
Related commands
ipsec { ipv6-policy | policy } isakmp template

display ipsec profile

Use display ipsec profile to display information about IPsec profiles.
Syntax
display ipsec profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name: Specifies an IPsec profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec profiles.
Examples
# Display information about all IPsec profiles.
<Sysname> display ipsec profile
-----------------------------------------------
IPsec profile: profile
Mode: manual
-----------------------------------------------
Description
IPsec policy template name.
Sequence number of the IPsec policy template entry.
Description of the IPsec policy template.
ACL referenced by the IPsec policy template.
IKE peer referenced by the IPsec policy template.
Remote end IP address of the IPsec tunnel.
Transform set referenced by the IPsec policy template.
Time-based IPsec SA lifetime, in seconds.
Traffic-based IPsec SA lifetime, in kilobytes.
321