Download Print this page

HP 6125G Configuration Manual: Ipv6 Pim-sm Non-scoped Zone Configuration Example

Hp 6125g & 6125g/xg blade switches ip multicast configuration guide-r2103.
Hide thumbs

Advertisement

(*, FF0E::101)
Protocol: pim-dm, Flag: WC
UpTime: 00:01:24
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: ACT
UpTime: 00:01:20
Upstream interface: Vlan-interface103
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
# Display IPv6 PIM multicast routing table information on Switch D.
[SwitchD] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:02:19
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 2
1: Vlan-interface103
2: Vlan-interface102

IPv6 PIM-SM non-scoped zone configuration example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire PIM domain is
operating in the sparse mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
VLAN-interface 105 on Switch D and VLAN-interface 102 on Switch E act as C-BSRs and C-RPs. The
C-BSR on Switch E has a higher priority. The IPv6 multicast group range served by the C-RP is
Protocol: mld, UpTime: 00:01:20, Expires: never
Protocol: pim-dm, UpTime: 00:01:20, Expires: never
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
323

Advertisement

Troubleshooting

   Related Manuals for HP 6125G

Comments to this Manuals

Symbols: 0
Latest comments: