HP 6125G Configuration Manual page 221

Ip multicast configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Figure 61 Network diagram
As shown in
Figure
61, Switch A works as an MLD snooping proxy. As a host from the perspective of the
querier Router A, Switch A represents its attached hosts to send their membership reports and done
messages to Router A.
Table 8
describes how an MLD snooping proxy processes MLD messages.
Table 8 MLD message processing on an MLD snooping proxy
MLD message
Actions
When receiving an MLD general query, the proxy forwards it to all ports but the receiving
General query
port. In addition, the proxy generates a report according to the group memberships that it
maintains and sends the report out of all router ports.
In response to the MLD group-specific query for a certain IPv6 multicast group, the proxy
Multicast-addres
sends the report to the group out of all router ports if the forwarding entry for the group still
s-specific query
contains a member port.
When receiving a report for an IPv6 multicast group, the proxy looks up the multicast
forwarding table for the entry for the multicast group.
Report
Then, the switch sends the report to the group out of all router ports.
In response to a done message for an IPv6 multicast group, the proxy sends a
multicast-address-specific query for the group out of the receiving port. After making sure
Done
that no member port is contained in the forwarding entry for the IPv6 multicast group, the
proxy sends a done message for the group out of all router ports.
If a forwarding entry matches the IPv6 multicast group, and contains the receiving port
as a dynamic member port, the proxy restarts the aging timer for the port.
If a forwarding entry matches the IPv6 multicast group but does not contain the receiving
port, the proxy adds the port to the forwarding entry as a dynamic member port and
starts an aging timer for the port.
If no forwarding entry matches the IPv6 multicast group, the proxy creates a forwarding
entry for the group, adds the receiving port to the forwarding entry as a dynamic
member port, and starts an aging timer for the port.
210

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents