Protocols And Standards; Configuring Pim-Dm; Pim-Dm Configuration Task List; Configuration Prerequisites - HP 6125G Configuration Manual

Figure 45 Relationships among PIM protocols
For more information about IGMP SSM mapping, see

Protocols and standards

RFC 3973, Protocol Independent Multicast-Dense Mode (PIM-DM): Protocol Specification(Revised)
•
RFC 4601, Protocol Independent Multicast-Sparse Mode (PIM-SM): Protocol Specification (Revised)
•
RFC 5059, Bootstrap Router (BSR) Mechanism for Protocol Independent Multicast (PIM)
•
RFC 4607, Source-Specific Multicast for IP
•
• Draft-ietf-ssm-overview-05, An Overview of Source-Specific Multicast (SSM)

Configuring PIM-DM

PIM-DM configuration task list

Task
Enabling PIM-DM
Enabling state-refresh capability
Configuring state-refresh parameters
Configuring PIM-DM graft retry period
Configuring PIM common features

Configuration prerequisites

Before you configure PIM-DM, complete the following tasks:
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
•
network layer.
"Configuring
Remarks
Required
Optional
Optional
Optional
Optional
114
IGMP."