HP 6125G Configuration Manual page 158
Ip multicast configuration guide
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (312 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[SwitchF-pim] c-bsr vlan-interface 109
[SwitchF-pim] c-rp vlan-interface 109
[SwitchF-pim] quit
Verifying the configuration
# Display BSR information and the locally configured C-RP information on Switch B.
[SwitchB] display pim bsr-info
Elected BSR Address: 10.110.9.1
Priority: 64
Hash mask length: 30
State: Accept Preferred
Scope: Global
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 10.110.1.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Uptime: 00:04:54
Next BSR message scheduled at: 00:00:06
Candidate BSR Address: 10.110.1.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Candidate RP: 10.110.1.2(Vlan-interface101)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:15
# Display BSR information and the locally configured C-RP information on Switch D.
[SwitchD] display pim bsr-info
Elected BSR Address: 10.110.9.1
Priority: 64
Hash mask length: 30
State: Accept Preferred
Scope: Global
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 10.110.4.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Uptime: 00:03:48
Next BSR message scheduled at: 00:01:12
147
Advertisement
Table of Contents
Troubleshooting
