For more information about the configuration of other timers in IPv6 PIM-DM, see
common
timers."
Configuring IPv6 PIM-SM
IPv6 PIM-SM configuration task list
Task
Enabling IPv6 PIM-SM
Configuring an RP
Configuring a BSR
Configuring IPv6
administrative scoping
Configuring IPv6 multicast source registration
Disabling the switchover to SPT
Configuring IPv6 PIM common features
Configuration prerequisites
Before you configure IPv6 PIM-SM, complete the following tasks:
•
Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
domain are interoperable at the network layer.
Determine the IP address of a static RP and the ACL rule defining the range of IPv6 multicast groups
•
to be served by the static RP.
Determine the C-RP priority and the ACL rule defining the range of IPv6 multicast groups to be
•
served by each C-RP.
•
Determine the legal C-RP address range and the ACL rule defining the range of IPv6 multicast
groups to be served.
Determine the C-RP-Adv interval.
•
Determine the C-RP timeout.
•
Determine the C-BSR priority.
•
Determine the hash mask length.
•
Configuring a static RP
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring an IPv6 PIM domain border
Configuring C-BSR parameters globally
Configuring C-BSR timers
Disabling BSM semantic fragmentation
Enabling IPv6 administrative scoping
Configuring an IPv6 admin-scope zone boundary
Configuring C-BSRs for IPv6 admin-scope zones
302
"Configuring IPv6 PIM
Remarks
Required.
Required.
Use any approach.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.