Download Print this page

HP 6125G Configuration Manual: Mld Snooping Proxying Configuration Example

Hp 6125g & 6125g/xg blade switches ip multicast configuration guide-r2103.
Hide thumbs

Advertisement

# Enable the MLD snooping feature and the function of dropping unknown IPv6 multicast data
packets in VLAN 100.
[SwitchB-vlan100] mld-snooping enable
[SwitchB-vlan100] mld-snooping drop-unknown
[SwitchB-vlan100] quit
Configure Switch C and Switch D in the same way as you configure Switch B.
3.
Verifying the configuration
When the MLD snooping querier starts to work, all the switches but the querier receive MLD general
queries. Use the display mld-snooping statistics command to display statistics for MLD messages
received.
# Display the MLD message statistics on Switch B.
[SwitchB-vlan100] display mld-snooping statistics
Received MLD general queries:3.
Received MLDv1 specific queries:0.
Received MLDv1 reports:12.
Received MLD dones:0.
Sent
Received MLDv2 reports:0.
Received MLDv2 reports with right and wrong records:0.
Received MLDv2 specific queries:0.
Received MLDv2 specific sg queries:0.
Sent
Sent
Received error MLD messages:0.

MLD snooping proxying configuration example

Network requirements
As shown in
as the MLD querier.
Configure MLD snooping proxying on Switch A. This enables the switch to forward MLD reports and
done messages on behalf of the attached hosts and to respond to MLD queries from Router A and then
forward the queries to the hosts on behalf of Router A.
MLDv1 specific queries:0.
MLDv2 specific queries:0.
MLDv2 specific sg queries:0.
Figure
65, MLDv1 runs on Router A and MLDv1 snooping runs on Switch A. Router A acts
234

Advertisement

Troubleshooting

   Related Manuals for HP 6125G

Comments to this Manuals

Symbols: 0
Latest comments: