Configuring Ipv6 Mbgp; Ipv6 Mbgp Overview; Ipv6 Mbgp Configuration Task List - HP 6125G Configuration Manual

Ip multicast configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Configuring IPv6 MBGP

This chapter covers configuration tasks related to multiprotocol BGP for IPv6 multicast. For information
about BGP and IPv6 BGP, see Layer 3—IP Routing Configuration Guide.
The term "router" in this chapter refers to both routers and Layer 3 switches.

IPv6 MBGP overview

IETF defined Multiprotocol BGP (MP-BGP) to carry routing information for multiple network-layer
protocols.
For an IPv6 network, the topology for IPv6 multicast might be different from that for IPv6 unicast. To
distinguish them, the MP-BGP enables BGP to carry the IPv6 unicast Network Layer Reachability
Information (NLRI) and IPv6 multicast NLRI separately, and the multicast NLRI performs reverse path
forwarding (RPF) exclusively. In this way, route selection for a destination through the IPv6 unicast routing
table and through the IPv6 multicast routing table have different results, ensuring consistent unicast
forwarding and normal multicast between domains. For information about RPF, see
multicast routing and
MP-BGP is defined in RFC 2858 (Multiprotocol Extensions for BGP-4). The application of MP-BGP on IPv6
multicast is called IPv6 Multicast BGP (IPv6 MBGP).

IPv6 MBGP configuration task list

Task
Configuring basic
IPv6 MBGP functions
Controlling route
distribution and
reception
Configuring IPv6
MBGP route
attributes
Tuning and
forwarding."
Configuring an IPv6 MBGP peer
Configuring a preferred value for routes from a peer or a peer
group
Injecting a local IPv6 MBGP route
Configuring IPv6 MBGP route redistribution
Configuring IPv6 MBGP route summarization
Advertising a default route to a peer or peer group
Configuring outbound IPv6 MBGP route filtering
Configuring inbound IPv6 MBGP route filtering
Configuring IPv6 MBGP route dampening
Configuring IPv6 MBGP route preferences
Configuring the default local preference
Configuring the MED attribute
Configuring the NEXT_HOP attribute
Configuring the AS_PATH attribute
Configuring IPv6 MBGP soft reset
346
"Configuring
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents