Displaying And Maintaining Igmp - HP 6125G Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Enable multicast forwarding on
a non-querier downstream
interface.

Displaying and maintaining IGMP

CAUTION:
The reset igmp group command might cause multicast data transmission failures.
To display and maintain IGMP:
Task
Display IGMP group information.
Display the Layer 2 port
information of IGMP groups.
Display information about the hosts
tracked by IGMP on the Layer 2
ports.
Display IGMP configuration and
operation information.
Display the information of IGMP
proxying groups.
Display information in the IGMP
routing table.
Command
system-view
interface interface-type
interface-number
igmp proxying forwarding
Command
display igmp group
[ group-address | interface
interface-type interface-number ]
[ static | verbose ] [ | { begin |
exclude | include }
regular-expression ]
display igmp group port-info [ vlan
vlan-id ] [ slot slot-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display igmp host port-info vlan
vlan-id group group-address
[ source source-address ] [ vlan
vlan-id ] [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
display igmp interface
[ interface-type interface-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display igmp proxying group
[ group-address ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
display igmp routing-table
[ source-address [ mask { mask |
mask-length } ] | group-address
[ mask { mask | mask-length } ] |
flags { act | suc } ] * [ | { begin |
exclude | include }
regular-expression ]
92
Remarks
N/A
N/A
Disabled by default
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.