Enabling Tftp - HP ProCurve 6120G/XG Configuration Manual

Procurve series 6120 blade switches management and configuration guide
Hide thumbs Also See for ProCurve 6120G/XG:
Table of Contents

Advertisement

4. To confirm that the software downloaded correctly, execute show system
For information on primary/secondary flash memory and the boot commands,
refer to "Using Primary and Secondary Flash Image Options" on page 6-14.
N o t e
If you use auto-tftp to download a new image in a redundant management
system, the active management module downloads the new image to both the
active and standby modules. Rebooting after the auto-tftp process completes
reboots the entire system.

Enabling TFTP

TFTP is enabled by default on the switch. If TFTP operation has been disabled,
you can re-enable it by specifying TFTP client or server functionality with the
tftp <client | server> command at the global configuration level.
U s a g e N o t e s
To disable all TFTP client or server operation on the switch except for the
auto-TFTP feature, enter the no tftp <client | server> command.
When ip ssh file transfer is used to enable SCP and SFTP functionality on the
switch, this will disable TFTP client and server functionality. Once ip ssh file
transfer is enabled, TFTP and auto-TFTP cannot be re-enabled from the CLI.
When TFTP is disabled, instances of TFTP in the CLI copy command and the
Menu interface "Download OS" screen become unavailable.
and check the Firmware revision line.
Syntax: [no] tftp <client | server [listen <oobm|data|both>]>
Disables/re-enables TFTP for client or server functionality so
that the switch can:
• Use TFTP client functionality to access TFTP servers in the
network to receive downloaded files.
• Use TFTP server functionality to upload files to other devices
on the network.
• For switches that have a separate out-of-band management
port, the
listen
to specify whether transfers take place through the out-of­
band management (oobm) interface, the data interface, or
both. Refer to Appendix G, "Networked Out-of-Band
Management (OOBM)" in this guide for more information
on out-of-band management.
Downloading Switch Software
parameter in a
server
configuration allows you
File Transfers
A-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120xgProcurve 6120 series

Table of Contents