Tftp Commands; Tftp - HP Enterprise FlexFabric 12900E Series Command Reference Manual

TFTP commands

tftp

Use to download a file from a TFTP server or upload a file to a TFTP server in an IPv4 network.
tftp
Syntax
tftp tftp-server
[ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp
dscp-value | source { interface interface-type interface-number | ip
source-ip-address } ] * [ -d ]
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server
case-insensitive string of 1 to 253 characters and can contain only letters, digits, hyphens (-),
underscores (_), and dots (.).
: Downloads a file and writes the file directly to the destination folder. If the destination folder
get
already has a file with the same name, the system deletes the existing file before starting the
download operation. The existing file is permanently deleted even if the download operation fails.
: Uploads a file.
put
: Downloads a file and saves the file to memory before writing it to the destination folder. The
sget
system starts to write the file to the destination folder only after the file is downloaded and saved to
memory successfully. If the destination folder already has a file with the same name, the system
overwrites the existing file. If the download or save-to-memory operation fails, the existing file in the
destination folder is not overwritten.
source-filename
characters.
destination-filename
255 characters. If this argument is not specified, the file uses the source file name.
vpn-instance vpn-instance-name
server belongs. The
characters. If the TFTP server belongs to the public network, do not specify this option.
dscp dscp-value
indicate the packet transmission priority. The value range is 0 to 63. The default is 0.
source
source-ip-address }
specify this option, the device uses the primary IPv4 address of the output interface for the route to
the TFTP server as the source address.
•
interface interface-type interface-number
and number. The device will use the interface's primary IPv4 address as the source IPv4
address. For successful TFTP packet transmission, make sure the interface is up and has the
primary IPv4 address configured.
{
: Specifies the IPv4 address or host name of a TFTP server. The host name can be a
: Specifies the source file name, a case-insensitive string of 1 to 1 to 255
: Specifies the destination file name, a case-insensitive string of 1 to
vpn-instance-name
: Specifies the DSCP value for IPv4 to use for outgoing TFTP packets to
{ interface
: Specifies the source address for outgoing TFTP packets. If you do not
get | put
: Specifies the MPLS L3VPN instance to which the TFTP
argument is a case-sensitive string of 1 to 31
interface-type
122
| sget } source-filename
interface-number
: Specifies an interface by its type
| ip