Console Port Login Configurations For Different Authentication Modes; Console Port Login Configuration With Authentication Mode Being None; Configuration Procedure - 3Com 4210G Series Configuration Manual

Console Port Login Configurations for Different Authentication Modes

Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authenticati
on mode
None
Password
Scheme
Changes of the authentication mode of Console port login will not take effect unless you exit and enter
again the CLI.
Console Port Login Configuration with Authentication Mode Being
None

Configuration Procedure

Follow these steps to perform Console port login configuration (with authentication mode being none):
To do...
Enter system view
Enter AUX user interface view
Configure not to authenticate
users
Configuration
Configure not to authenticate users
Configure to authenticate users using
the local password
Set the local password
Configure to authenticate users
locally or remotely
Configure the authentication mode
Create or enter a local user, set the
authentication password, specifies
the level and service type for AUX
users
Use the command...
system-view
user-interface aux 0
authentication-mode none
2-5
Description
Refer to Console Port Login
Configuration with Authentication
Mode Being None for details.
Refer to Console Port Login
Configuration with Authentication
Mode Being Password
Refer to Console Port Login
Configuration with Authentication
Mode Being Scheme for details.
Remarks
—
—
Required
By default, users logging in through
the Console port are not
authenticated.
for details.