3Com 4210G Series Configuration Manual page 331

127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
1.1.6.0/24 Direct 0
1.1.6.1/32 Direct 0
# Use the ping command on Host B to check reachability to Host A, assuming Windows XP runs on
the two hosts.
C:\Documents and Settings\Administrator>ping 1.1.2.2
Pinging 1.1.2.2 with 32 bytes of data:
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Ping statistics for 1.1.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
# Use the tracert command on Host B to check reachability to Host A.
[HostB] tracert 1.1.2.2
Tracing route to 1.1.2.2 over a maximum of 30 hops
1 <1 ms <1 ms
2 <1 ms <1 ms
3 1 ms <1 ms
Trace complete.
0 127.0.0.1
0 127.0.0.1
0 192.168.1.47
0 127.0.0.1
<1 ms 1.1.6.1
<1 ms 1.1.4.1
<1 ms 1.1.2.2
2-6
InLoop0
InLoop0
Vlan100
InLoop0