Displaying And Maintaining Rmon; Rmon Configuration Example - 3Com 4210G Series Configuration Manual

Displaying and Maintaining RMON

To do...
Display RMON statistics
Display the RMON history
control entry and history
sampling information
Display RMON alarm
configuration information
Display RMON prialarm
configuration information
Display RMON events
configuration information
Display log information for the
specified or all event entries.

RMON Configuration Example

Network requirements
Agent is connected to a configuration terminal through its console port and to a remote NMS across
the Internet.
Create an entry in the RMON Ethernet statistics table to gather statistics on GigabitEthernet 1/0/1, and
enable logging after received bytes exceed the specified threshold.
Figure 18-1 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1-rmon
[Sysname-GigabitEthernet1/0/1] quit
# Display RMON statistics for interface GigabitEthernet 1/0/1.
<Sysname> display rmon statistics GigabitEthernet 1/0/1
Statistics entry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet1/0/1<ifIndex.3>
etherStatsOctets
Use the command...
display rmon statistics
[ interface-type interface-number ]
display rmon history
[ interface-type interface-number ]
display rmon alarm
[ entry-number ]
display rmon prialarm
[ entry-number ]
display rmon event
[ entry-number ]
display rmon eventlog
[ entry-number ]
: 21657 , etherStatsPkts
18-5
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
: 307