3Com 4210G Series Configuration Manual page 316

To do...
Enter interface view
Configure an IPv4 address for the interface
Configure an
IPv6 global
unicast
address or
site-local
address
Configure an
IPv6
address on
the interface
Configure an
IPv6
link-local
address
For information about IPv4 addressing, refer to IP Addressing Configuration in the IP Services
Volume.
For more information about IPv6 address, refer to IPv6 Basics Configuration in the IP Services
Volume.
For how to enable IPv6 and configure an IPv6 address on an interface, refer to IPv6 Basics
Commands in the IP Services Volume.
Use the command...
interface interface-type
interface-number
ip address ip-address
{ mask | mask-length }
[ sub ]
ipv6 address
{ ipv6-address prefix-length
Manually specify
|
an IPv6 address
ipv6-address/prefix-length
}
Configure an
ipv6 address
IPv6 address in
ipv6-address/prefix-length
the EUI-64
eui-64
format
Automatically
create an IPv6
ipv6 address auto
link-local
link-local
address
Manually specify
ipv6 address ipv6-address
an IPv6 link-local
link-local
address
14-2
Remarks
—
Required
By default, no IP
address is
configured.
Use either
command.
By default, no
site-local address
or global unicast
address is
configured on an
interface.
Optional
By default, after
you configured an
IPv6 site-local
address or global
unicast address, a
link local address
is automatically
created.