3Com 4210G Series Configuration Manual page 955

# Enable SNMP logging on the agent to log the GET and SET operations of the NMS.
[Sysname] snmp-agent log get-operation
[Sysname] snmp-agent log set-operation
The following log information is displayed on the terminal when the NMS performs the GET
operation to the agent.
%Jan 1 02:49:40:566 2006 Sysname SNMP/6/GET:
seqNO = <10> srcIP = <1.1.1.2> op = <get> node = <sysName(1.3.6.1.2.1.1.5.0)> value=<>
The following log information is displayed on the terminal when the NMS performs the SET
operation to the agent.
%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:
seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node =
<sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>
Table 16-1 Description on the output field of SNMP log
Field
Jan 1 02:49:40:566 2006
seqNO
srcIP
op
node
erroIndex
errorstatus
value
The system information of the information center can be output to the terminal or to the log buffer. In
this example, SNMP log is output to the terminal. For configuration of SNMP log output to other
destinations, see Information Center Configuration in the System Volume.
The time when SNMP log is generated
Sequence number of the SNMP log ()
IP address of NMS
SNMP operation type (GET or SET)
Node name of the SNMP operations and OID of the instance
Error index, with 0 meaning no error
Error status, with noError meaning no error
Value set when the SET operation is performed (This field is null,
meaning the value obtained with the GET operation is not logged.)
When the value is a string of characters and the string contains
characters not in the range of ASCII 0 to 127 or invisible characters,
the string is displayed in hexadecimal. For example, value =
<81-43>[hex]
16-11
Description