Configuring Wfq Queuing - 3Com 4210G Series Configuration Manual

To do...
Enter
interface
Enter
view
interface
view or port
Enter port
group view
group view
Enable WRR queuing
Configure a WRR queue
Configuration example
1) Network requirements
Enable WRR queuing on the interface GigabitEthernet 1/0/1.
Assign queues 0 through 7 to the WRR group, with their weights being 1, 2, 4, 6, 8, 10, 12, and 14.
2) Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure the WRR queues on port GigabitEthernet1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 1
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group 1 weight 4
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group 1 weight 6
[Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 8
[Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 10
[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 12
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 14

Configuring WFQ Queuing

Configuration procedure
Follow these steps to configure a WFQ queue:
To do...
Enter system view
Enter
Enter
interface
interface
view
view or port
Use the command...
interface interface-type
interface-number
port-group manual
port-group-name
qos wrr
qos wrr queue-id group group-id
weight schedule-value
Use the command...
system-view
interface interface-type
interface-number
5-6
Remarks
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Optional
The default queuing algorithm
on an interface is WRR
queuing.
Required
By default, all the ports adopt
the WRR queue scheduling
algorithm, with the weight
values assigned to queue 0
through queue 7 being 1, 2, 3,
4, 5, 9, 13, and 15.
Remarks
—
Use either command
Settings in interface view take
effect on the current interface;