Snmp Test Configuration Example - 3Com 4210G Series Configuration Manual

Min positive SD: 3
Max positive SD: 30
Positive SD number: 186
Positive SD sum: 2602
Positive SD average: 13
Positive SD square sum: 45304
Min negative SD: 1
Max negative SD: 30
Negative SD number: 181
Negative SD sum: 181
Negative SD average: 13
Negative SD square sum: 46994
One way results:
Max SD delay: 46
Min SD delay: 7
Number of SD delay: 410
Sum of SD delay: 3705
Square sum of SD delay: 45987
SD lost packet(s): 0
Lost packet(s) for unknown reason: 0
The display nqa history command cannot show you the results of UDP jitter tests. Therefore, to know
the result of a UDP jitter test, you are recommended to use the display nqa result command to view
the probe results of the latest NQA test, or use the display nqa statistics command to view the
statistics of NQA tests.

SNMP Test Configuration Example

Network requirements
Use the NQA SNMP query function to test the time it takes for Device A to send an SNMP query packet
to the SNMP agent and receive a response packet.
Figure 24-8 Network diagram for SNMP tests
Configuration procedure
1) Configurations on SNMP agent.
# Enable the SNMP agent service and set the SNMP version to all, the read community to public, and
the write community to private.
Min positive DS: 1
Max positive DS: 79
Positive DS number: 158
Positive DS sum: 1928
Positive DS average: 12
Positive DS square sum: 31682
Min negative DS: 1
Max negative DS: 78
Negative DS number: 209
Negative DS sum: 209
Negative DS average: 14
Negative DS square sum: 3030
Max DS delay: 46
Min DS delay: 7
Number of DS delay: 410
Sum of DS delay: 3891
Square sum of DS delay: 49393
DS lost packet(s): 0
23-30