3Com 4210G Series Configuration Manual page 929

[Sysname-luser-ftp] service-type ftp
[Sysname-luser-ftp] quit
# Enable FTP server.
[Sysname] ftp server enable
[Sysname] quit
# Check files on your device. Remove those redundant to ensure adequate space for the startup file to
be uploaded.
<Sysname> dir
Directory of flash:/
0 -rw- 10471471 Sep 18 2008 02:45:15
1 -rw- 9989823 Jul 14 2008 19:30:46
2 -rw- 6 Apr 26 2000 12:04:33
3 -rw- 2337 Apr 26 2000 14:18:45
4 drw- - Apr 26 2000 13:10:56
5 -rw- 2337 Apr 26 2000 13:47:32
6 -rw- 478164 Apr 26 2000 14:52:35
7 -rw- 368 Apr 26 2000 12:04:04
8 -rw- 2337 Apr 26 2000 14:16:48
9 -rw- 2195 Apr 26 2000 14:10:41
31496 KB total (11004 KB free)
2) Configure the PC (FTP Client)
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
# Download the configuration file config.cfg of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to the root directory of the storage medium on the master.
ftp> put newest.bin
ftp> bye
4210G-d501.bin
4210G_b57.bin
patchstate
startup.cfg
test
archive_1.cfg
4210G_505.btm
patch_xxx.bin
sfp.cfg
4210G.cfg
12-14