3Com 4210G Series Configuration Manual page 883

Character
Used to match a character string starting
\<string
with string.
Used to match a character string ending
string\>
with string.
Used to match character1character2.
character1 can be any character except
\bcharacter2
number, letter or underline, and \b
equals [^A-Za-z0-9_].
It must match a string containing
\Bcharacter character, and there can no spaces
before character.
Used to match character1character2.
character2 must be a number, letter or
character1\w
underline, and \w equals [^A-Za-z0-9_].
\W Equals \b.
Escape character. If single special
characters listed in this table follow \, the
\
specific meanings of the characters will
be removed.
Multiple-screen output
When there is a lot of information to be output, the system displays the information in multiple screens.
Generally, 24 lines are displayed on one screen, and you can also use the screen-length command to
set the number of lines displayed on the next screen. (For the details of this command, refer to Login
Commands in the System Volume.) You can follow the step below to disable the multiple-screen output
function of the current user.
To do...
Disable the
multiple-screen
output function
screen-length disable
of the current
user
Display functions
CLI offers the following feature:
When the information displayed exceeds one screen, you can pause using one of the methods shown
in Table 9-6.
Meaning
Use the command...
For example, "\<do" can match word
"domain" or string "doa".
For example, "do\>" can match word
"undo" or string "abcdo".
For example, \ba can match -a, with -
represents character1, and a represents
character2; while \ba cannot match "2a"
or "ba".
For example, "\Bt" can match "t" in
"install", but not "t" in "big top".
For example, "v\w" can match "vlan",
with "v" being character1, and "l" being
character2. v\w can also match
"service", with "i" being character2.
For example, "\Wa" can match "-a", with
"-" representing character1, and "a"
representing character2; while "\ba"
cannot match "2a" or "ba".
For example, "\\" can match a string
containing "\", "\^" can match a string
containing "^", and "\\b" can match a
string containing "\b".
Required
By default, a login user uses the settings of the
screen-length command. The default settings of the
screen-length command are: multiple-screen output
is enabled and 24 lines are displayed on the next
screen.
This command is executed in user view, and
therefore is applicable to the current user only. When
a user re-logs in, the settings restore to the system
default.
9-20
Remarks
Remarks