Configuring the Cisco TrustSec Solution
Revised: July 13, 2012, OL-22192-01
This chapter includes the following topics:
•
•
•
Configuration Overview
This guide documents elementary Cisco TrustSec configuration procedures for Cisco Catalyst switches
and includes a TrustSec command reference.
For network-wide deployment configurations, see the section,
Documents."
A network-wide deployment includes the configuration, interoperability, and management of multiple
devices, which may include the Cisco Identity Services Engine (Cisco ISE), The Cisco Secure Access
Control System (Cisco ACS), Cisco IP Telephones, Cisco routers, Cisco network appliances, etc.
White papers and presentations explaining the Cisco TrustSec Solution are at the following URL:
http://www.cisco.com/en/US/netsol/ns1051/index.html
Cisco TrustSec Configuration How-to Documents
A series of "How-to" configuration documents provides deployment guidelines and best practices for
proven network architectures in complex scenarios. Find all Cisco TrustSec "How-To" documents at the
following URL:
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
TrustSec 2.1 Configuration How-to Guide topics include the following:
•
•
•
•
•
OL-22192-01
Configuration Overview, page 2-1
Default Settings, page 2-3
Additional Documentation, page 2-3
Introduction
Planning and Pre-Deployment Checklist
ISE Base Configuration: ISE Bootstrapping
Adding ID Stores and Creating Authentication
Global Switch Configuration
2
C H A P T E R
"Cisco TrustSec Configuration How-to
Cisco TrustSec Configuration Guide
2-1