Cisco TrustSec Configuration Manual page 175

Chapter 7 Cisco TrustSec Command Summary
show cts policy peer
To display the peer authorization policy data of TrustSec peers, use the show cts policy peer command
in EXEC or privileged EXEC mode.
Syntax Description This command has no commands or keywords.
Defaults
None
Command Modes
EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Examples The following example displays the TrustSec peer authorization policy of all peers:
VSS-1# show cts policy peer
CTS Peer Policy
===============
Peer name: VSS-2T-1
Peer SGT: 1-02
Trusted Peer: TRUE
Peer Policy Lifetime = 120 secs
Peer Last update time = 12:19:09 UTC Wed Nov 18 2009
Policy expires in 0:00:01:51 (dd:hr:mm:sec)
Policy refreshes in 0:00:01:51 (dd:hr:mm:sec)
Cache data applied = NONE
Output Field
Peer name
Peer SGT
Trusted Peer
Peer Policy Lifetime
Peer Last update time
OL-22192-01
show cts policy peer
Modification
This command was introduced on the Catalyst 6500 series switches.
Explanation
CTS device-id of the peer to which the local device is
connected.
The Security Group Tag of the peer.
TRUE—The local device trusts the SGT tagged in the
packet coming from this peer.
FALSE—The device does not trust the SGT tagged in the
packet coming from this peer.
The length of time this policy is valid before it is refreshed.
The time when this policy was last refreshed
Cisco TrustSec Configuration Guide
show cts policy peer
7-89