Cisco TrustSec Configuration Manual page 134

clear cts macsec
clear cts macsec
To clear the MACsec counters for a specified interface, use the clear cts macsec counters command.
Syntax Description
interface type slot/port
Command Modes Privileged EXEC
Supported User Roles Administrator
Command History Release
12.2(50) SY
Examples The following example clears the counters on a gigabitEthernet interface on a Catalyst 6500 series
switch:
Router# clear cts macsec counters interface gigabitEthernet 6/2
Related Commands Command
show cts macsec
show cts interface
Cisco TrustSec Configuration Guide
7-48
clear cts macsec counters interface type slot/port
Modification
This command was introduced on the Catalyst 6500 Series Switches.
Description
Chapter 7 Cisco TrustSec Command Summary
Specifes the interface.
OL-22192-01