Cisco TrustSec Configuration Manual page 135

Chapter 7 Cisco TrustSec Command Summary
clear cts pac
To clear TrustSec Protected Access Credential (PAC) information from the keystore,
use the clear cts pac command in privileged EXEC mode.
Syntax Description A-ID hexstring
all
Defaults
None
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History Release
12.2(33) SXI
Examples The following command clears all PACs in the keystore:
Router# clear cts pac all
Related Commands Command
show cts pacs
show cts keystore
OL-22192-01
clear cts pac {A-ID hexstring | all}
Specifies the authenticator ID (A-ID) of the PAC to be removed from the
keystore.
Specifies that all PACs on the device be deleted.
Modification
This command was introduced on the Catalyst 6500 series switches.
Description
Displays the A-ID and PAC-info for PACs in the keystore.
Displays the contents of the keystore.
Cisco TrustSec Configuration Guide
clear cts pac
7-49