Table of Contents
Advertisement
Chapter 7
Cisco TrustSec Command Summary
switch# debug cts ifc events
switch# debug cts authentication details
In the following example, SXP connection and mapping database messages are filtered by IP address and
SGT. Only SXP debug messages that contain IP address 10.10.10.1, or security-group tag = 8, or
security-group name = "engineering" are displayed.
switch# debug condition ip 10.10.10.1
switch# debug condition cts security-group tag 8
switch# debug condition cts security-group name engineering
switch# show debug condition
switch# debug cts sxp conn
switch# debug cts sxp mdb
Related Commands
Command
show debug condition
OL-22192-01
Condition 1: cts peer-id Zoombox (0 flags triggered)
Condition 2: cts security-group tag 7 (0 flags triggered)
Condition 3: cts security-group name engineering (0 flags triggered)
Condition 1 set
Condition 2 set
Condition 3 set
Condition 1: ip 10.10.10.1 (0 flags triggered)
Condition 2: cts security-group tag 8 (0 flags triggered)
Condition 3: cts security-group name engineering (0 flags triggered)
Description
Displays all conditions set for debug commands.
debug condition cts
Cisco TrustSec Configuration Guide
7-57
Hide quick links:
Advertisement
Table of Contents
