Table of Contents
Advertisement
Chapter 7
Cisco TrustSec Command Summary
Examples
The following example configures an IPV4 Flow Record (5-tuple, direction, SGT, DGT):
router(config)# flow record cts-record-ipv4
router(config-flow-record)# match ipv4 protocol
router(config-flow-record)# match ipv4 source address
router(config-flow-record)# match ipv4 destination address
router(config-flow-record)# match transport source-port
router(config-flow-record)# match transport destination-port
router(config-flow-record)# match flow direction
router(config-flow-record)# match flow cts source group-tag
router(config-flow-record)# match flow cts destination group-tag
router(config-flow-record)# collect counter packets
Related Commands
Command
show flow monitor
cts role-based
OL-22192-01
Description
Displays the status and statistics for a Flexible NetFlow flow monitor
For Flexible NetFlow, this command has the option to attach the flow
monitor to all Layer 3 interfaces to collect statistics of traffic dropped by
SGACLs.
match flow cts
Cisco TrustSec Configuration Guide
7-61
Hide quick links:
Advertisement
Table of Contents
