Cisco TrustSec Configuration Manual page 184

Table of Contents

Advertisement

show cts sxp
The following example displays the SXP connections on a Catalyst 6500 switch using the brief keyword:
Router# show cts sxp connection brief
SXP
Default Password : Set
Default Source IP: Not Set
Connection retry open period: 10 secs
Reconcile period: 120 secs
Retry open timer is not running
-----------------------------------------------------------------------------
Peer_IP
-----------------------------------------------------------------------------
2.2.2.1
3.3.3.1
Total num of SXP Connections = 2
The following example displays the SXP connections on a Catalyst 6500 series switch:
Router# show cts sxp connections
SXP
Default Password : Set
Default Source IP: Not Set
Connection retry open period: 10 secs
Reconcile period: 120 secs
Retry open timer is not running
----------------------------------------------
Peer IP
Source IP
Set up
Conn status
Connection mode
Connection inst# : 1
TCP conn fd
TCP conn password: not set (using default SXP password)
Duration since last state change: 0:00:01:25 (dd:hr:mm:sec)
----------------------------------------------
Peer IP
Source IP
Set up
Conn status
Connection mode
TCP conn fd
TCP conn password: not set (using default SXP password)
Duration since last state change: 0:00:01:25 (dd:hr:mm:sec)
Total num of SXP Connections = 2
The following example displays output from an SXP listener with a torn down connection to the SXP
speaker. SourceIP-to-SGT mappings are held for 120 seconds, the default value of the Delete Hold Down
timer.
Router# show cts sxp connections
SXP
Default Password : Set
Default Source IP: Not Set
Connection retry open period: 10 secs
Reconcile period: 120 secs
Retry open timer is not running
----------------------------------------------
Cisco TrustSec Configuration Guide
7-98
: Enabled
Source_IP
Conn Status
2.2.2.2
On
3.3.3.2
On
: Enabled
: 2.2.2.1
: 2.2.2.2
: Peer
: On
: SXP Listener
: 1
: 3.3.3.1
: 3.3.3.2
: Peer
: On
: SXP Listener
: 2
: Enabled
Chapter 7
Cisco TrustSec Command Summary
Duration
0:00:02:14 (dd:hr:mm:sec)
0:00:02:14 (dd:hr:mm:sec)
OL-22192-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents