Table of Contents
Advertisement
Chapter 7
Cisco TrustSec Command Summary
Examples
The following example configures himalaya and cisco as the CTS device ID and password:
Router# cts credentials id himalaya password cisco
CTS device ID and password have been inserted in the local keystore. Please make sure that
the same ID and password are configured in the server database.
The following example changes the CTS device ID and password to atlas and cisco123:
Router# cts credentials id atlas pacssword cisco123
A different device ID is being configured.
This may disrupt connectivity on your CTS links.
Are you sure you want to change the Device ID? [confirm] y
TS device ID and password have been inserted in the local keystore. Please make sure that
the same ID and password are configured in the server database.
The following example displays the CTS device ID and password state:
Router# show cts credentials
CTS password is defined in keystore, device-id = atlas
Related Commands
Command
clear cts credentials
show cts credentials
show cts keystore
OL-22192-01
Description
Clears the Cisco TrustSec device ID and password.
Displays the state of the current Cisco TrustSec device ID and password.
Displays contents of the hardware and software keystores.
cts credentials
Cisco TrustSec Configuration Guide
7-11
Hide quick links:
Advertisement
Table of Contents
